924Board.org

Most likely it is out of fluid due to a leaking... probably slave cylinder but that is just a guess. Check for leaks, replace the culprit, bleed the system and hit the road!

I really like the look, what headlights did you use? and is that a 951 front bumper/fascia? looks good but i've never seen them for less than $2 arms and 1 leg!

dgKnecht
I actually did this not too long ago. I'll look it up tomorrow when I go by the shop. I ended up buying a metric (neoprene, not rubber) o-ring kit instead of just buying one at a time but ...

Thanks Smoothie! I guess its rebuild time...

OK guys, I don't post a lot here but I definately spend countless hours reading, my current question is: Is a Warm-Up Regulator out of a 924 the same as the one out of the 931? I have a spare one fro ...

I'd look into the Warm-up Regulator. Mine seems to have problems as soon as it starts to warm-up and i've been meaning to do this modification: http://www.rpm.com.au/911/html/tech_w.html (the second ...

Smoothie, ideola; Awesome to hear guys! I had some bad luck a few (ok 7) years ago and heard the same from a couple others so I've always been against switching to synthetic. Its great to hear some su ...

Haha, I agree. These things are starting to depress me, every time I get in the care and close the door the get all droopy! Well I guess I'll take my ruler to the salvage yard when I go this weekend ...

FRPorscheman,
I agree with some of the guys that $700 might be a little steep for one with the engine apart.

I disagree with ideola on one point though, I STRONGLY suggest you don't put syntheti ...

Reading through JB924's link made me wonder, has anyone found a good replacement vent for the 924? Other than the late 944, I was thinking something a little sturdier, or more stylish even.

I never really understood that, so many people seem to believe that if a speedometer goes to a certain speed the car must. How would that even make sense?

You're right on not using any sort of thread sealer on the OP sender. Almost all single wire sender/sensors ground through the block, so you might check that too. G'luck!

Looks good. When will we be getting the on-the-car pics and update?

Munk,

How did you make your own shifter bushings? I'd love to see that as a how-to. I'm going to have to do mine soon! Thanks.

Nick-
I'm a big fan of your car! I think that the head work you're doing is awesome, a nice increase in volume with a decrease in CR should work well for a turbo engine. I have no reason to think t ...