924Board.org

Looks great! Could be the one I bought new in the summer of 1977. I kept it until about 1990 and sold it with less than 30K miles. Last 4 digits of my VIN were: XXXXXX1978. Any chance it's the same ca ...

Thanks to those who jumped in so quickly to try an help with my question.

After a couple of nights pondering on the problem I decided that there could be no other answer than the Steering Column Be ...

Yes, The black plastic collar is off!

If it had something to do with the Steering Wheel lock, as was suggested, how could I get around that?

Thanks for the reply but unfortunately that seemed to have no effect. Is that bearing on the steering shaft just supposed to be a slip fit or does it have some interference?

I am trying to change the electrical portion of my Ignition Switch on my 1979 NA. I Have searched, read and followed everything I could find on here, but now I am stuck. I have removed the wiring harn ...

Does anyone know what the part number is for that spring? I have two 1979s and one has the spring and the other does not. Most manuals only picture some sort of a "leaf spring" that fits on ...

Thanks for the reply!

In the center of each of the three dome shaped main gauge faces is a small black cap - Can anyone tell me how these are held in? I have two missing on one car and want to swap from another but don't j ...

Try this link http://www.clarks-garage.com/, then go to "The Garage Shop Manual" - under there you find directions for Cargo Cover Repair. I haven't tried it but sounds good to me.

Dan

Thanks for the replys. You had the answer! Mine is not flat, so that is the problem. Once I push down on it the lever goes all the way to the end.

Dan

I removed the heater contol assy (3 slider type) from my 1979 US spec 924. Nothing seemed to be working and all the levers were out of place!

Once I got it out and cleaned up - I got all the lever ...

The bottom of my 1979 Door Panels (cards) have some water damage. As a result some of the panel clips have no solid place to go! Has anyone done any repair/resoration work on that molded fiberboard ma ...

I have a 1979 924 with the "Space Saver" spare. I don't have a manual and I wonder if anyone could describe or post a picture of how things fit together in the tire well.

Thanks,
Dan

Thanks for the replys. I got it off and you are right it took a lot more force than I expected.

Can someone tell me how to remove the Horn Pad from a 4 spoke "Sport" steering wheel. I have tried "pushing and turning" like I have done on some others but there isn't much room s ...