924Board.org

Thanks grenadiers but I think the transistorised system Im referring to might be a different item though I stand to be corrected on this. The unit is for a 'webbered' NA 924 and not a turbo, which mig ...

Ok so i need the distibutor as a whole, I presume this is a straight fit. The transistorised system is still fitted to the car and it seems the whole wiring system is also in place. If I were to remov ...

I have a transistorised ignition box which seems to be from a 1981(late type) model. I would like to fit it on a 1979 model which has a normal ignition system eg, distributor with points. This unit is ...

Iv seen this on a Ford 2lit engine, using the webbers or else in this case dellortos work as Throttle bodies, I belive the guy had his injectors mounted in the inlet manifold, but dont know any more d ...

Ideola Iv seen that table just yesterday and as usual you have been very helpful. On this particular engine I need to go the easy way since I at least want to see the car in some way on the road, I ha ...

If there is interference then there are 2 solutions, Either I keep the standard gasket and go for the bigger valves or else go for the thinner head gasket and keep the standard valves which according ...

Iv just been comunicating with David Newman of Newmans Cams UK. He states that there will be no type of interference when using the .027'' cylinder gasket, with standard or bigger valves and his POW 2 ...

In my first post I asked or wondered if a slimmer head gasket could be fitted to aquire a bit more CR from the engine, this method is easy to do on other heads without having to go to extravagant expe ...

Thanks Stef, I will just have to wait for someone to work it out then. I cant find anything about clearances on the Haynes book either or else I have skipped it somewhere. It wont be worth it if I hav ...

So if I increase the CR by half a point by placing a .027'' thick gasket, and if I increase the valve sizes, shall I be risking interference?? Should I therefore settle for the standard valves and the ...

Yes Stefan I guess it is flat, flat as can be actually. My pistons arnt completly flat though, they have counter sunk valve shapes on the top, are these counter sunk to avoid interference? or is this ...

Im not sure if this has been done to any 924 NA head, but is it possible to fill up/weld any part of the combustion chamber and re shaping it, I think this would also increase CR?? or am I wrong? If t ...

I guess one thing goes with another, I will check with the engineer works regarding interference, I havnt decided on valve size yet but would like to know if the half point gasket would make a differe ...

Ok a .027'' will do fine if thats the max it will go slimmer, the 2 week to turn around is not a problem since I would be needing it in around 4 to 5 weeks most probably due to other work being done. ...

I will soon be needing a new cylinder head gasket, since this is to be changed I was wondering if a less thicker gasket can be used to increase CR, The engine is a ROW so has I believe 9:3 to 1 CR, t ...