924Board.org

It sounds like the cold start switch added is just emulating the normal one that heats electrically at starts and powers that extra injector. The normal electrically heated injector swtich cuts out a ...

Agfisher keeps mentioning this. I went through this whole nightmare about a year ago. Car had sat for 15 yrs and all was varnished. Pulled fuel tank and had radiator shop clean it and then put back in ...

I don't know if these have the wood grain, but you can use VW door handles and I'm 99% sure that the inserts are interchangeable. Something like this? Unfortunately you have to buy the entire handle s ...

those are NLA now
but if someone has a 3D printer I guess these could be reproduce.
we could even replace the "fake wood" finish with PROSCHE script!!

indeed! Geez, they cost more than ...

Hi all,
can someone please advise whom sells the trim insert for the outside door handle on the 924 (i think same as 944 from the picture). My handles are fine, but the inserts are stuffed.

https: ...

Hi All,
would anyone please know if the seat fabric for the 924 Martini model is still available from somewhere?

The black I am sure is available, but I am more wondering about the orange/red vel ...

ok, still going with this and getting no where fast. I have had it suggested to me that it could be the throttle position switch sensor. I have had a look under the hood, but can't find anything tha ...

thank you.

thanks for the reply. Sorry, it is a 1980 model i believe. Going to check the vacuum hoses best I can. Is there a clear diagram showing where they all should be and what they are connected too floa ...

Ok, so I have now set the timing (with vacuum advance disconnected) to +10 as per specs.
Here is a video of it running. So, it starts ok, but won't accelerate. In the video, I show this using throt ...

Ok, here are some photos as it stands now. So, i have got the car started - again, but pressing cold start button - which I can only assume triggers the cold start valve somehow. It idles, but won't ...

Checked firing order 1, 4, 3, 2 as per what was on the rocker cover.
Wrong, look again. It`s 1342

Tried starting it - same as before. Won't start unless you hold in the 'cold start' button and th ...

thanks for the replies guys - got back on to it today.
I put a new fuel filter on, removed all the fuel injectors, inspected and cleaned them (they were not too bad anyway. I removed all the plugs , ...

Are these kits or parts still being made in Australia?

I'd like to know too? Anyone?

Hi all,
just new to the forum - and have a 924 to play with! There are some photos below, but basically, it is a low mileage unit, but has been left sitting around for quite some time. Definitely ...