924Board.org

I've managed to get a little bit further but the problem is still not solved:

The voltage over the battery terminals is just the battery voltage when the car is running... so the alternator is stil ...

Thanks for the suggestion. The battery is brand new (bought from an internet site though)
With the voltage measurement I mean the following:
- The alternator is installed
- D+ terminal connected
- ...

Yes with the battery lead (coming from starter) not connected to the B+ on the alternator.
Thats what I meant with the voltage readings.

alternator to block resistance is 0.01 ohm

Replaced it today with one i knew that was working is doing the exact same,

Might this be the dashboard indication lamp?

The wiring to the starter had been completly renewed, the cable from the starter to the alternator is new and the cable from the connector near the battery to the D+ terminal is also renewed (slightly ...

Hello guys

i'm facing some problems with the generator of my 924 from '79 and i could really use some help since i'm already struggling with it for a few days.

Main problem is that the generator ...

I checked the air valve, it is fully closing. So it doesn't look like the problem is there...

The second guess was right, with or without de wur connected makes no difference. Fuel pressure is alwa ...

Hello guys,

I encountered some other problems today. My 924 NA from 1979 is starting, running and idles at about 1000 rpm just after starting.
From that point on, the rpm's steadly increase...Aft ...

Hey,

Just a quick question because i'm kinda stuck:
On my 924 NA (1980) both turn indicators are working properly,
When i switch on the emergency flasher, only the dashboard indicator is lighting ...

It finally fired up today! Oh boy, that was a good feeling!!
The crankshaft was 20 degrees misaligned with the camshaft. So that story of 'working untill the end' was a load of sh*t!

How it gave ...

Thanks for the advice!

The air mixture screw on top of the distributor is not doing much, i will investigate tomorrow.

The results of the compression test are good.

Engine is going around smo ...

Yeah so what you are saying is that the CIS is faulty?

Ow sorry, they foul quickly indeed...

Thanks for the reply

Spark plugs are new.
Air flap is moving freely.
Starter pilot is also not doing much

I willl try to do the vacuum test this week

Hello guys,

I am trying to bring a 924 NA from 1981 back to life. The previous owner didn't drive it for almost 15y. Before he stored it, it was running smootly (according to him.)

Now I replac ...