924Board.org

Gene · Posted: Sat Sep 08, 2012 2:17 am Post subject: '79 924 control pressure to high

Have already checked the wru lines for restrictions and also unhooked the return line into a gas can and have good fuel flow there. The wur is rebuilt, had two rebuilds on car infact and another from a good running car and put the one off my car onto the other car and the wru ran that car fine so I'm stumped ! '79 was the only year they had the warm start solinoid but I hot wired it and it seems to work ok. Thinking there might be something in the fuel dist. causing the problem ???

Gene · Posted: Sat Sep 08, 2012 2:20 am Post subject: '79 924 control pressure to high

Should have mentioned that I didn't have the gadge hooked up when I did the test with the wur in the can.