924Board.org

ponchojuan · Joined: 20 Jul 2004 Posts: 51 Location: Boston, MA

Anyone know where you can get the molding for the windshield. Seems someone removed the molding on the left and right side. It's the inner part. Top is still there.

Is this a dealer only part?

poncho

78 924

jpab924 · Posted: Tue Sep 07, 2004 11:46 am Post subject:

How about used? The moldings are easy to remove, but more than likely you will need the clips that hold the molding in place. I have your moldings and a spare rear bumper for you also..pm me and we can negotiate a price. I can`t provide the molding clips for you.

My924gtc · Joined: 14 Aug 2004 Posts: 1362 Location: 248

Please be more specific on "it's the inner part" Are you in need of the interior trim pieces or the windshield molding. I'm a little confused.
_________________
MJ
'81 924 2.0L T
'82 924 2.3L SC/EFI <---online fall '06

Sponsor of the 944 Cup and Super Cup
Sponsor of the "2006 Battle in the Badlands"

ponchojuan · Joined: 20 Jul 2004 Posts: 51 Location: Boston, MA

Sorry Mark.

On the exterior windshild trim, there appears to be a two piece molding (inner and outer)that has three sections: Left, right and top. I need the left and right pieces. They are black. I can sed you a picture if necessary.

poncho.

Vince Ponz · Joined: 02 Nov 2002 Posts: 3581 Location: Florida

There were more than two types of moulding and clips if I am not mistaken. The older mouldings had a little tab that fit in the center piece. Some of the later ones had rubber joiners for lack of a better word. The early 944s also had a rubber strip that fit in the mouldings on both sides.
I have the mouldings you want also. If all others fail let me know.
_________________
"Never let them see you sweat"
77.5 924 modified track car
79 931 Euro stock
88 924S SE
87 911 Targa stock