| View previous topic :: View next topic |
| Author |
Message |
Hugo
Joined: 11 Jun 2003
Posts: 73
Location: Uden, the Netherlands
|
 Posted: Wed Jan 05, 2005 8:55 am Post subject: gt front spoiler |
 |
|
| Does anyone know how you build in the turn signal unit. when you look at the picture of a gt, the lens of the unit comes along the side of the spoiler. on a normal bumper you attach it with a screw in the edge of the unit, but this now is at the back of the spoiler. Does anyone happen to have any pics how it is supposed to be? Thanks |
|
| Back to top |
|
 |
924zombie
Joined: 02 Oct 2004
Posts: 52
Location: cold old UK
|
| Posted: Wed Jan 05, 2005 11:04 am Post subject: |
|
|
Dude good question,i`ve just that noticed that on mine,the original indicator looks like its had the bit with the screw cut off,then was attached with the remaining two screws,and a 3rd from inside the indicator near the end that had the bit cut off.  |
|
| Back to top |
|
|
Hugo
Joined: 11 Jun 2003
Posts: 73
Location: Uden, the Netherlands
|
| Posted: Thu Jan 06, 2005 7:59 am Post subject: |
|
|
| Yeah but if that was so, they would have made a different unit. I've checked the pet cd, and the turn signal units are the same as for the euro 924 bumper. |
|
| Back to top |
|
|
924zombie
Joined: 02 Oct 2004
Posts: 52
Location: cold old UK
|
| Posted: Thu Jan 06, 2005 8:24 pm Post subject: |
|
|
| Hugo wrote: | | Yeah but if that was so, they would have made a different unit. I've checked the pet cd, and the turn signal units are the same as for the euro 924 bumper. |
Excellent,my pet won`t load into this new machine for some reason,but i`ll be doing the front in the next couple of weeks and i need to put two new indicators in as the others are both dead,if i remember i`ll take pics and stuff. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
