924Board.org

[KANEDA]

Hello i'm back (i change my computer ^^)

I have the possibility to have a 931 without engine and my 924 2.0L have engine

I would know if it's possible to take my 924 engine in the 931 turbo ?


Thanks you very much for your help

[Paul]

Sure, you will need to use the bell housing, clutch, pressure plate, flywheel, starter, starter block off plate, etc from the 931 on the 924 motor.

Since you will be relocating the starter on the 924 motor, you may be able to use the 931's oil filter setup and the 931's oil cooler on the 924 motor. (I am not sure if this will interfere with the 924 exhaust manifold or not.)

You will need to use the 924's fuel injection, wiring harness and computers.

You will need to use the 924's exhaust system.
_________________
White 87 924S "Ghost"
Silver 98 986 3.6l 320 HP "Frank N Stein"
White 01 986 "Christine"
Polar Silver 02 996TT. "Turbo"
Owned and repaired 924s since 1977
Porsche: It's not driving, it's therapy.