924Board.org

Kenodog · Joined: 25 Jun 2003 Posts: 2669 Location: Vancouver,B.C.

has anyone made solid transaxle mounts before ? If so how did it affect the shifting ?
_________________
1979 Euro 931, Olive
1981 931, Sabine
1991 Ford Ranger XLT 4x4, Ricky
1996 Ford E-350 ex-FedEx Van
2014 Mazda CX-5 (Kinderwagon)
2019 KTM 790 Adventure
2024 KLX300
2024 KLX140

Kenodog · Joined: 25 Jun 2003 Posts: 2669 Location: Vancouver,B.C.

C'mon.....nobody has solid transmission mounts ???
_________________
1979 Euro 931, Olive
1981 931, Sabine
1991 Ford Ranger XLT 4x4, Ricky
1996 Ford E-350 ex-FedEx Van
2014 Mazda CX-5 (Kinderwagon)
2019 KTM 790 Adventure
2024 KLX300
2024 KLX140

Raceboy · Joined: 01 Mar 2004 Posts: 2327 Location: Estonia, Europe

My friend had those on his racer, but they gave awful drivetrain noise to the chassis. I wouldn't put them on a daily driver.
_________________
'83 924 2.6 16v Turbo, 470hp
'67 911 2.4S hotrod
'90 944 S2 Cabriolet
'78 924 Carrera GT replica
'84 928 S, sold
'91 944 S2, sold
'82 924S/931 "Gulf", sold

'84 924, turbocharged, sold.
http://www.facebook.com/vemsporsche

flosho · Posted: Sun Jun 11, 2006 12:10 am Post subject:

I asked this question once before, solid motor mounts and trans mount. No one makes them for our cars that I'm aware of. It would definately help put some more power to the wheels..

If you come up with something, post it up. They shouldn't be hard to make homemade ones, just a little welding..
_________________
[This Space For Rent]

Lizard · Posted: Sun Jun 11, 2006 3:11 am Post subject:

if you do make solid ones (it has been done track cars only) you must do solid engine mounts as well, and at the same time you will have to seriously beef up the engines frame mounts.
_________________
3 928s,