924Board.org

dwak · Joined: 03 Nov 2002 Posts: 839 Location: Eastern Ontario

Does anyone have a decent one available? For an '87 924S, left front. Does anyone know which models share this setup? 1984 and up 944?

dwak
_________________
2x924NA's for parts
931
924S

gohim · Joined: 02 Nov 2002 Posts: 4459 Location: Rialto, CA

According to my parts books, should be the same for 84-88 944 and 924S.

Is there a reason that you can't install a seal kit in yours for $15-$20?

dwak · Joined: 03 Nov 2002 Posts: 839 Location: Eastern Ontario

Previous owner did some damaging 'modifications'.
Thanks for info.

dwak
PS It's not the same as the 924Turbo though, is it?
_________________
2x924NA's for parts
931
924S

Ogre1 · Joined: 15 Jul 2006 Posts: 2 Location: CT

I have two 924Ss. 1987 with a blown engine I just bought off EBay and a crash damaged 1988 killed by a blonde distracted 17 year old, totaled rear end. Currently in progress removing the blown engine to swap my recently rebuilt engine out of the crashed car. Should have the caliper your looking for, if you still need it. Give me a hollar.
Mike
[/url]
_________________
"Those who fail to learn from history's lessons are doomed to repeat them..."
Attributed to every major culture for the last 5500 years. And we're still messing it up.

Peter_in_AU · Joined: 29 Jul 2001 Posts: 2745 Location: Sydney, Australia

so dwak's back. Good to hear from you after all this time.
_________________
1979 924 (Gone to a better place)
1974 Lotus 7 S4 "Big Valve" Twin-cam (waiting)
1982 924 (As featured on Wikipedia)

Learn to love your multimeter and may the search be with you

dwak · Joined: 03 Nov 2002 Posts: 839 Location: Eastern Ontario

Thanks Ogre one kinobi. I'll reply tomorrow when I'm 'compus mentus'(?).

Hi Peter, you're right it has been a while. Marital splits and all. Anyway, things are coming back together for me.

ciao,
dwak
_________________
2x924NA's for parts
931
924S