| View previous topic :: View next topic |
| Author |
Message |
skytrooper
Joined: 29 Aug 2007
Posts: 461
Location: Canandaigua, NY
|
 Posted: Thu Oct 25, 2007 4:24 am Post subject: Fuel Level Sending Unit |
 |
|
| The one in my 1987 924S is not functioning (most likey from sitting in varnish gas for 10 years)...anyway, is the fuel sending unit from a 944 interchangeable ? |
|
| Back to top |
|
 |
924RACR
Joined: 29 Jul 2001
Posts: 9111
Location: Royal Oak, MI, USA
|
| Posted: Thu Oct 25, 2007 4:47 am Post subject: |
|
|
Early ones, yes I think so...
_________________
Vaughan Scott
Webmeister
'79 924 #77 SCCA H Prod racecar
'82 931 Plat. Silver
#25 Hidari Firefly P2 sports prototype |
|
| Back to top |
|
|
joecitizennn
Joined: 12 Sep 2005
Posts: 2096
Location: no mans land
|
| Posted: Sat Oct 27, 2007 9:34 am Post subject: |
|
|
| You might try removing it, and gently shaking it to see if the float is moving. If the float is free, but you dont have a signal you can take the unit apart by unscrewing the very bottom (plastic cap on bottom of aluminum tube). The thing is held together by a rod that is threaded on the very bottom. The float rides up and down the rod and has contacts that touch very thin wires. (Hair thin wires!) If these are broken (likely) you will need another unit. |
|
| Back to top |
|
|
skytrooper
Joined: 29 Aug 2007
Posts: 461
Location: Canandaigua, NY
|
| Posted: Sat Oct 27, 2007 12:00 pm Post subject: |
|
|
I will check it when I have it out. I got another one on ebay "on the way".
As always...
Thanks Joe ! |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
