924Board.org

[Rich H]

Hey guys, I have had a search and can't find an answer...

I have a 1980 Euro spec 924 and I have fitted a rear roll bar off a '44 (As per the guide by Chrenan, thanks!) and I was hoping to uprate the front bar too but after having got the ARB mounts and an ARB off a later '24 it has become apparent that the chassis rails are different, my car has a beefy mount for the front ARB where the later bar bolts to the front chassis legs.

Are there any other stiffer factory bars that will be a direct fit? While its not too bad, its is clear the front bar is not stiff enough any more. I could chop the mounts about, should not be too hard but a bolt on would be easier!
_________________
1994 Lotus Esprit S4 - Work in progress...
1980 Porsche 924 S2 DITC Turbo - Original spec
1978 Homo-Sapiens - Tired spec
1953 Landrover S1 - Pensioner Spec

[Rasta Monsta]

Biggest one is 23 (M471). What are you running now? The 23 combined with stiffer springs will probably get you where you want to go.
_________________
Toofah King Bad

• WeiBe (1987 924S 2.5t) - 931 S3

[Rich H]

I will have to go and measure it, but its the standard one.
Ta
Rich
_________________
1994 Lotus Esprit S4 - Work in progress...
1980 Porsche 924 S2 DITC Turbo - Original spec
1978 Homo-Sapiens - Tired spec
1953 Landrover S1 - Pensioner Spec

[ic932]

i've got a M471 front bar from an 81' 931 which is the old style and will fit.

pm me if you are interested....

[Vince Ponz]

I have a 25.5 mm front bar in the front. We mounted the bar under the A arm and relocated the long metal straps to the rails.

Works fine.
_________________
"Never let them see you sweat"
77.5 924 modified track car
79 931 Euro stock
88 924S SE
87 911 Targa stock

[Browar]

The biggest front sway bar in steel A-arms is 24mm from early 944 T .
_________________
Browar
eS
924 S `87