Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

jack stands and clutch advice?

 
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions
View previous topic :: View next topic  
Author Message
924turborox  



Joined: 07 May 2009
Posts: 60
Location: MD, USA
PostPosted: Fri May 22, 2009 8:03 am    Post subject: jack stands and clutch advice? Reply with quote
is it alright to use a normal 924 clutch in a 1980 924 turbo?
and can someone please explain to me how to use jack stands properly?
i really dont want to damage the chassis of my car

thanks porsche community
Back to top
View user's profile Send private message
v8carreragts  



Joined: 05 Sep 2003
Posts: 665
Location: Tucson, AZ
PostPosted: Fri May 22, 2009 9:10 am    Post subject: Reply with quote
You cannot use a 924 clutch in a 924 turbo. It is completely different. the 924 is a push type and 215mm in diameter with a 20mm x 24 spline hub and the turbo is a pull type with a 225mm diameter and a 25mm x 23 spline hub.

As for jack stands, I usually place them in back under the torsion bar tube and in front under the frame members just behind the firewall.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group