| View previous topic :: View next topic |
| Author |
Message |
ideola
Joined: 01 Oct 2004
Posts: 15550
Location: Spring Lake MI
|
 Posted: Fri Dec 18, 2009 1:09 am Post subject: clutch cable ends |
 |
|
Who would be willing to send me a clutch cable end, the screw-on type, (broken is fine)? Just stick in an envelope with a stamp...
...I was going to take one in to have a look at duplicating them in aluminum, but the clutch cable I have must be different than the ones you guys are always complaining about breaking. The end that goes on the clutch fork is definitely not the same as the end that goes in the cockpit, and neither end screws off, they are pressed on and clamped somehow.
I'll post photos later, but if anyone has one that they'd be willing to send as a sample, and pronto, please PM or email me.
_________________
erstwhile owner of just about every 924 variant ever made |
|
| Back to top |
|
 |
BionicBalls
Joined: 05 Jan 2009
Posts: 642
Location: Charlotte, NC
|
| Posted: Fri Dec 18, 2009 1:41 am Post subject: |
|
|
the ones you always here guys complaining about are off of the early 24s. I bought some stainless steel ends for mine that I planned on putting on at the same time as I changed my snapped clutch cable only to find what you stated. Neither end screws off and both ends are different.
Long story short, I don't have a broken one  but I do have 2 stainless steel ones that I'm trying to unload if anybody is interested 
_________________
1980 924 NA
1982 931 |
|
| Back to top |
|
|
924guy
Joined: 29 Dec 2003
Posts: 2088
Location: Port St. Lucie, FL
|
| Posted: Sat Dec 19, 2009 10:09 pm Post subject: Re: clutch cable ends |
|
|
| ideola wrote: | Who would be willing to send me a clutch cable end, the screw-on type, (broken is fine)? Just stick in an envelope with a stamp...
...I was going to take one in to have a look at duplicating them in aluminum, but the clutch cable I have must be different than the ones you guys are always complaining about breaking. The end that goes on the clutch fork is definitely not the same as the end that goes in the cockpit, and neither end screws off, they are pressed on and clamped somehow.
I'll post photos later, but if anyone has one that they'd be willing to send as a sample, and pronto, please PM or email me. |
Ive got a worn out and broken one i will send you...
_________________
Eric
78 924
82 931 SE "smokey"
99' VehiCross
Y2K Honda Insight
http://www.cardomain.com/id/924Guy
Performance by Pasha |
|
| Back to top |
|
|
ideola
Joined: 01 Oct 2004
Posts: 15550
Location: Spring Lake MI
|
| Posted: Sun Dec 20, 2009 1:03 am Post subject: |
|
|
Perfect. Do you by chance happen to know the model years for which it applies? My '81 doesn't have ends like that, as you can see by the pix...
_________________
erstwhile owner of just about every 924 variant ever made |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
