924Board.org

dash16 · Joined: 22 Aug 2007 Posts: 255 Location: Cali Cali

Where are all the critical ones? I want to clean them out

Any advice on what to clean them with?

thanks in advance.
_________________
1987 Porsche 924S Black/Black. 5-spd.
Options: AFX C79 261 398 423 650 651 657

1987 Mercedes 190E 2.3-16 Cosworth Pearl Black/Black. 5-spd.

STUTTGART PREVAILS

924guy · Posted: Tue Mar 16, 2010 12:40 pm Post subject:

http://www.924.org/techsection/elect_diag.htm

i use a wire brush, and a bit of dielectric grease over the bolt/terminal (not on the mating surfaces) to keep it clean...
_________________
Eric
78 924
82 931 SE "smokey"
99' VehiCross
Y2K Honda Insight
http://www.cardomain.com/id/924Guy
Performance by Pasha

edredas · Joined: 09 Dec 2004 Posts: 861 Location: Charlotte, NC

Page 197 of the 944 Haynes manual shows the locations of the ground points.
_________________
'84 944 -White, Brown interior
'84 944 -Red, Automatic
'86 944 -Garnet, Fully loaded, Koni suspension
'87 924S -Red, 300hp 951 swap
'87 924S -Red, Project Car
'88 924S -Red, Daily Driver

dash16 · Joined: 22 Aug 2007 Posts: 255 Location: Cali Cali

masterdave · Joined: 10 Dec 2008 Posts: 183 Location: Harrison NY

i have it but i dont know how to post pictures to the forum, send me your email to colangelod@gmail.com

bcblase · Joined: 23 Oct 2007 Posts: 574 Location: Winchester, VA

+1 on the dielectric grease.

I have used fine emory cloth to clean the terminals and lugs.

Brad
_________________
1987 Porsche 924S - track toy
1986 Mercedes 190E 2.3-16v - autocross
2007 F-150 5.4L Lariat Supercrew - tow beast
1994 Volvo 850 Race Wagon - 24 Hours of Lemons Car
2001 BMW 325xi - daily driver

John_AZ · Posted: Mon Mar 29, 2010 4:15 am Post subject:

For future reference...
FYI-Photobucket IMG code