924Board.org

Patrick

Hi All!
I have the 1979 Snailshell car and plan on replacing my Front Shift lever bushings part # 999-924-002-40 (4 pcs). I checked out Pelican and Paragon.

I then looked at the product picture of each, and Pelican showed what is supposed to be a genuine porsche part (together with the above part number), where the bushing has a slit along its entire length.

The bushing from Paragon ( product code # 944-424-2301) looked different and had what looked like little notches at one end. Its applicability says that it fits 924 NA 1977-1982 and some early and later NA and Turbo 944`s.

So which would be the better choice in terms of performance, quality and ease of fitting? Thank You,
patrick
_________________
1979 924 U.S. version
Single sidedraft Weber 40

Rasta Monsta · Joined: 12 Jul 2006 Posts: 11733 Location: PacNW

THE ONE FROM PARAGON is not correct.
_________________
Toofah King Bad

WeiBe (1987 924S 2.5t) - 931 S3

Rasta Monsta · Joined: 12 Jul 2006 Posts: 11733 Location: PacNW

THE ONE FROM PARAGON is not correct.
_________________
Toofah King Bad

WeiBe (1987 924S 2.5t) - 931 S3

Patrick · Posted: Sun Sep 01, 2013 12:17 pm Post subject:

That was a simple enough answer. Thank You!
_________________
1979 924 U.S. version
Single sidedraft Weber 40