924Board.org

Kenodog · Joined: 25 Jun 2003 Posts: 2669 Location: Vancouver,B.C.

As the title says, anyone know what thread they use for the wastegate control line ?

Thanks,
Leigh
_________________
1979 Euro 931, Olive
1981 931, Sabine
1991 Ford Ranger XLT 4x4, Ricky
1996 Ford E-350 ex-FedEx Van
2014 Mazda CX-5 (Kinderwagon)
2019 KTM 790 Adventure
2024 KLX300
2024 KLX140

ideola · Joined: 01 Oct 2004 Posts: 15550 Location: Spring Lake MI

At which end? There is a banjo bolt at the wastegate side, I think it's either M10 or M12; there is a funky little adapter that converts a smaller thread (in the charge tube) to the compression style thread on the upper flexible portion of the wastegate line. I have this documented somewhere but my quick search wasn't successful in locating it...
_________________
erstwhile owner of just about every 924 variant ever made

ideola · Joined: 01 Oct 2004 Posts: 15550 Location: Spring Lake MI

Maybe this is what you're after:
http://www.924board.org/viewtopic.php?t=29196
_________________
erstwhile owner of just about every 924 variant ever made

kcoyle · Joined: 15 Jan 2011 Posts: 712 Location: Long Island, NY

If you need the charge tube end I believe its either m14x1.5 or m12x 1.5.
Taken from below thread.

http://www.924board.org/viewtopic.php?t=37336&sid=55fc17c6ee1d1607801249518ce6fa78
_________________
1982 931- Stock with MBC at 8psi

Relax, all right? My old man is a television repairman, he's got this ultimate set of tools. I can fix it.