| View previous topic :: View next topic |
| Author |
Message |
chris79

Joined: 29 Jan 2014 Posts: 551 Location: milan
|
Posted: Mon Jan 18, 2016 8:00 am Post subject: new problem k-jetronic |
|
|
today my engine crackles in acceleration and performances are poor over 140 km/h.
Pression and control pressure are good, my injectors and o-ring are new, but after I turn off engine there is a leak in control pressure circuit, this value go zero in few seconds.
Clackling seems due to injectors, but how is possible ? _________________ Porsche 924 2.0 na 125hp (1979) euro
------------------------------------------------------
Alfa Romeo Spider "Duetto" 1.6 104hp (1986) euro |
|
| Back to top |
|
 |
chris79

Joined: 29 Jan 2014 Posts: 551 Location: milan
|
|
| Back to top |
|
 |
chris79

Joined: 29 Jan 2014 Posts: 551 Location: milan
|
Posted: Tue Jan 19, 2016 2:54 am Post subject: |
|
|
I solved problem, electrode of first cylinder was bent, and is not the first time. _________________ Porsche 924 2.0 na 125hp (1979) euro
------------------------------------------------------
Alfa Romeo Spider "Duetto" 1.6 104hp (1986) euro |
|
| Back to top |
|
 |
gerben1986
Joined: 13 Mar 2008 Posts: 232 Location: The Netherlands
|
Posted: Tue Jan 19, 2016 3:31 am Post subject: |
|
|
How is it possible that it bend??? _________________ 911SC - 1980 |
|
| Back to top |
|
 |
chris79

Joined: 29 Jan 2014 Posts: 551 Location: milan
|
|
| Back to top |
|
 |
chris79

Joined: 29 Jan 2014 Posts: 551 Location: milan
|
Posted: Tue Jan 19, 2016 6:51 am Post subject: |
|
|
I solved the mystery, the sleeve of first injector is broken , then mixture on this cylinder is lean, temperatore is too high and this bent electrode. _________________ Porsche 924 2.0 na 125hp (1979) euro
------------------------------------------------------
Alfa Romeo Spider "Duetto" 1.6 104hp (1986) euro |
|
| Back to top |
|
 |
|