| View previous topic :: View next topic |
| Author |
Message |
Kenodog
Joined: 25 Jun 2003
Posts: 2669
Location: Vancouver,B.C.
|
 Posted: Thu Jul 20, 2017 2:05 pm Post subject: Disc wear limit |
 |
|
I tried to look up the minimum rear disc thickness in Haynes but it is not listed. Anyone remember off hand what it is ...?
tia,
Leigh
_________________
1979 Euro 931, Olive
1981 931, Sabine
1991 Ford Ranger XLT 4x4, Ricky
1996 Ford E-350 ex-FedEx Van
2014 Mazda CX-5 (Kinderwagon)
2019 KTM 790 Adventure
2024 KLX300
2024 KLX140 |
|
| Back to top |
|
 |
Rhubie
Joined: 15 Jun 2017
Posts: 72
Location: ND
|
| Posted: Thu Jul 20, 2017 3:27 pm Post subject: |
|
|
I couldn't find it either(though it is 12am my time at the moment)
Honestly, if you have to question and it makes you uncomfortable just replace it. Easy fix in my mine
_________________
1980 Porsche 924 Weissach Commemorative Edition |
|
| Back to top |
|
|
SlayerSST
Joined: 21 Sep 2010
Posts: 212
|
| Posted: Thu Jul 20, 2017 5:51 pm Post subject: |
|
|
Front
Rear
These specs are for CENTRIC rotors which should be similar to other brands.
Info is good for 924 cars that came with 5 lug suspension. |
|
| Back to top |
|
|
TJC
Joined: 04 Apr 2010
Posts: 828
Location: Northwestern-ish Arizona, USA
|
| Posted: Fri Jul 21, 2017 1:06 am Post subject: |
|
|
That spec is also usually cast or engraved on the rotor itself.
_________________
'95 BMW 318i/5 ..."Pearl"
'87 Porsche 944 NA... "Liebchen"
'02 Porsche Boxster..."Sunbeam"
'04 BMW X3..."Xander"
Still on the Prowl!
www.ttrs1.com |
|
| Back to top |
|
|
Kenodog
Joined: 25 Jun 2003
Posts: 2669
Location: Vancouver,B.C.
|
| Posted: Fri Jul 21, 2017 7:55 am Post subject: |
|
|
Thanks guys. Yes, I knew they were usually stamped on the side but I could not find it on these particular rotors. I only asked because I got a set of already turned rotors in a parts lot for a guy that is a VW / Audi mechanic. He was a very, very particular type of guy so i figured he would have measured them and turned them at work as long as they were still within limits. Problem I see is, they are both at 17mm thick now after turning so....scrap I guess.
I already ordered two new ones and will pick them up and install them this weekend. (along with a shite-ton of other little jobs I need to finish on Olive)
Lee
_________________
1979 Euro 931, Olive
1981 931, Sabine
1991 Ford Ranger XLT 4x4, Ricky
1996 Ford E-350 ex-FedEx Van
2014 Mazda CX-5 (Kinderwagon)
2019 KTM 790 Adventure
2024 KLX300
2024 KLX140 |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
