Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

1981 Turbo Ignition Coil Question

 
Post new topic   Reply to topic    924Board.org Forum Index -> 931 Tech.
View previous topic :: View next topic  
Author Message
takafoomi  



Joined: 12 Jun 2026
Posts: 1
Location: Victoria, Minnesota, USA
PostPosted: Fri Jun 19, 2026 9:02 am    Post subject: 1981 Turbo Ignition Coil Question Reply with quote
Hello! My 1981 Turbo ignition coil shows a primary reading of 3.5 ohms and a secondary reading of 7.46 .. Now, this is not the original Bosch coil and I realize it is out of spec for 1981. However, can you put a modern coil in it and have similar readings and the car will start/run fine? Or do I need to find a coil which is closer to the 1981 spec.

Thanks!
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> 931 Tech. All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group