| View previous topic :: View next topic |
| Author |
Message |
augidog
Joined: 03 Mar 2003
Posts: 1360
Location: New Jersey
|
 Posted: Sat May 03, 2003 12:22 pm Post subject: head bolt size? |
 |
|
Anybody know the hex head bolt size for a 79 924. Im on vacation this week and Im going to retorque the head warm but I need to buy the hex wrenches before I open it up.
Stupid question- Do I need gasket seal or will the gaskets work alone Thanks
_________________
1978 924 95 mile daily driver.
Audi TB/POR174M/High Flow Cat/2.25" exhaust
I knew that positive thinking thing wouldn't work. |
|
| Back to top |
|
 |
Paul
Joined: 02 Nov 2002
Posts: 9491
Location: Southeast Wisconsin
|
| Posted: Sun May 04, 2003 7:43 am Post subject: |
|
|
| 10 mm allen. Best to buy the type that you use with a rachet. |
|
| Back to top |
|
|
dpw928
Joined: 02 Nov 2002
Posts: 1860
Location: owasso, ok 74055
|
| Posted: Sun May 04, 2003 7:50 am Post subject: |
|
|
No sealant. Just use the new gaskets and it shouldn't leak.
Dennis
_________________
81 931 5 sp
78 928 5 sp Silver
78 928 AT Euro Black |
|
| Back to top |
|
|
augidog
Joined: 03 Mar 2003
Posts: 1360
Location: New Jersey
|
| Posted: Sun May 04, 2003 9:08 am Post subject: |
|
|
Thankyou gentlemen, much appreciated
_________________
1978 924 95 mile daily driver.
Audi TB/POR174M/High Flow Cat/2.25" exhaust
I knew that positive thinking thing wouldn't work. |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
